Blue Barrier Overview

Blue Barrier System

bep-blue-barrier-logo ABEP web_logo

Image Gallery           Application Brief

BEP® Blue Barrier is a family of products designed to protect ALL structural locations that are vulnerable to unwanted air, moisture, and mould intrusion, including windows and doors, as well as structural penetration areas like transitions, joints, seams, and claddings.

Blue Barrier is formulated on (STPE) proprietary modified technology.
The products cure and bond on wet substrates, as well as on vertical waterproofing applications.

Our Blue Barrier System has been issued a CodeMark Certificate No. BSC-130214-CMNZ

CodeMark – is the name of the scheme for the certification of building products in Australia and New Zealand. The scheme has been developed by the Australian Building Codes Board in Australia and the Ministry of Building, Innovation and Employment (previously Department of Building and Housing) in New Zealand.

The scheme is designed to provide high level confidence that building products, correctly used in either Australia or New Zealand, will meet or contribute to the meeting of, the relevant Building Code ‘performance requirements’. Building control authorities are required to accept a CodeMark Certificate by law.

 

Flood Protection

Blue Barrier system – Successful Flood Protection Trial, July 2014 – Christchurch, New Zealand

> See Latest News for detail

Floodtrial1

 

 

A Complete Air & Moisture Barrier System

Liquid Flashing 2100

is an all-purpose, liquid applied flashing used in construction applications to bridge dissimilar materials and to create weather resistant, fully adhered pan membranes in window and door installations. Liquid Flashing can be applied over surfaces and substrates that have been prepared per the BEP® Blue Barrier Application Guides. Blue Barrier Liquid Flashing 2100 is part of the BEP® air and moisture barrier system.
Read more

Joint Filler 2200

is a structural adhesive and detail sealant used to fill voids and seams and to bond dissimilar materials. Joint Filler can be applied to surfaces and substrates that have been prepared per the BEP® Blue Barrier Application Guides. Blue Barrier Joint Filler 2200 is part of the BEP® air and moisture barrier system.
Read more

Liquid Wrap 2300

is a spray applied, fully adhered, permeable, air and moisture building envelope protection membrane. This thin mm, seamless substrate coating can be applied with an approved airless sprayer. This thin mm, seamless substrate coating can be applied with an approved airless sprayer. Liquid Wrap can be sprayed over surfaces and substrates that have been prepared per the BEP® Blue Barrier Application Guides.
Read more

Flash ‘N Wrap RG2400

is an all-purpose, fully adhered, liquid membrane that can be used for roller applied flashing applications, such as bridging dissimilar materials, and to create liquid applied pan membranes in window & door installations, as well as a roller applied permeable wall substrate coating for thin mm building envelope protection applications. Flash’N Wrap RG 2400 can be applied over surfaces and substrates that have been prepared per the BEP® Blue Barrier Application Guides.
Read more