Products

All purpose high performance liquid membrane

Pitched & flat roof poly-aspartic water-proofing membrane. It is an all-purpose, fully adhered, poly-aspartic liquid membrane that can be applied by roller, brush or spray applications to create a durable flexible membrane for deck and roof installations, as well as a non-permeable wall tanking membrane coating.

Approved Applications
  • Roofs and deck installations
  • Internal gutters
Substantial Benefits of Eco Seal 100
  • Cost effective
  • One step application, no primer required unless applied to bitumen or silicon based substrates
  • Superior shore hardness
  • Ideal viscosity, supports roller, brush and spray applications
  • Exceptional adhesion, bonds to multiple substrates
  • Proprietary modified poly-aspartic technology produces a durable seamless membrane
  • Environmentally friendly, solvent free, isocyanate free and VOC free
  • Tested by independent ISO 90001 laboratory for 10,000 hours UV weathering
  • Contains latest German technology components

See Eco Seal in action   Contractors Mixing Video Guide

Aqua Guard Underwater Sealant 3200P is an advanced proprietary (STPE) technology specifically designed for underwater applications in both fresh and saltwater. Underwater Sealant can be used as flashing or sealant to bridge voids and seal substrate joints and transitions that are in continuous contact with water. Can be applied in dry and wet conditions or underwater. There is also a non-potable version, that requires advanced notice for ordering.

Approved Applications

  • Bridge substrate gaps and transitions above and below the waterline.
  • Underwater detail flashing applications.
  • Suitable where shock, vibration, shrinking or swelling are concerns.
  • Repair leaky seams and sealant failures in aquatic enclosures.

Features and Benefits

  • Certified safe for use in drinking water storage tanks whether applied dry or underwater- AUS/NZ 4020
  • Independently tested for marine toxicity, Safe for aquatic life.
  • Superior shore hardness/Prevents flashing wear and tear.
  • Exceptional underwater adhesion, bonds and cures to multiple substrates underwater.
  • Non sag creates a better and cleaner application bead.
  • Environmentally friendly, 100% Solids, solvent-free, isocyanate-free and low VOC.
  • Proprietary (STPE) technology, provides superior adhesion.
  • Tack free in <60 min, allows for greater productivity and can be used as an emergency water stop above or below the waterline.

Note: As with all adhesives, sealants, and bonding products, proper surface preparation is critical to the final application success. Technical and Safety data can be obtained from our website.

 

Link Coat

Binding mechanism between surface and coating

Link Coat is a two-part, tough and hard-wearing etch primer. It adheres to existing painted surfaces, concrete, timber and waterproofing membranes and sealants with minimal preparation.

Link Coat is frequently used as an etch primer to ensure adhesion of subsequent coatings over areas with silicone or hydrophobic sealers.

  • High performance polymer is resistant to yellowing and age crazing
  • State of the art UV absorbers assist in surface protection from the effects of sunlight
  • Supplied at application viscosity for an extremely tough and flexible film
  • Viscosity can be adjusted with suitable solvents to allow for spray applications

Eco Glow 100

Exterior grade photo-luminescent coating

Eco-Glow 100 PL is a two pack flexible self priming high hysteresis water-proofing membrane, designed for on-site application to walkways, bridge rails, tunnels and building entrances, concrete coving, wharfs and jetties, roof top walkways, step, stairs and ladders or any substrate that needs to be visible during the hours of darkness.

It’s great for surfaces that also require toughness, UV stability and a high degree of protection from water ingress. Contains a high performance, long-lasting photo-luminescent pigment with high luminescence value and rapid recharge.

Eco-Glow 100 PL is a zero VOC product suitable for most substrates.

Substantial Benefits of Eco Glow 100
  • A waterproof membrane that glows in the dark
  • Can be applied by spray, brush, or roller
  • Bonds to most surfaces
  • Glows for up to 10 hours at a time
  • Suitable for a wide range of applications where night visibility is important

See Eco Glow in action Learn More

Muck Off

Moss and mold killer & cleaning, degreasing concentrate

A highly effective bio-degradable water-based moss and mold killer, cleaning and degreasing concentrate that is safe for the environment and also the applicator. Results are much more rapid than chemical-based products.

Features and Benefits of Muck Off
  • Cost-effective application 10 to 1 concentrate for moss and mould killer mix.
  • One or two applications depending on the degree of growth on the substrate
  • Garden sprayer application
  • Will not kill your grass or garden
  • Environmentally friendly, solvent-free, isocyanate-free and VOC free

Elasto-shield S300 is a water-based tough, hard-wearing elastomeric coating that adheres to existing painted surfaces, concrete, timber, waterproofing membranes with link coat primer with minimal preparation. Supplied at application viscosity, it gives an extremely tough and flexible film. Because it uses a high-performance polymer it is resistant to yellowing and age crazing. It has state of the art UV absorbers incorporated that assist in surface protection from effects of sunlight. It is frequently used as a waterproofing/sealing, and decorative coating on concrete construction panels, renders and plasters.

  • Single high solids content water-based coating
  • Cost-effective
  • Ideal viscosity, supports roller, brush and spray application
  • Available in any colour on a Resene colour chart

Eco Clear is an all-purpose, fully adhered, poly-aspartic liquid hard clear membrane that has ideal viscosity so it can be applied by roller, brush or spray applications to create a durable seamless flexible membrane for decorative and waterproofing installations.

Applied at 1000 micron plus Eco Clear may be used in many building protection applications. Eco Clear must be applied over surfaces and substrates that have been prepared per the Eco-seal clear application guide.

Eco Clear is environmentally friendly, solvent-free, isocyanate-free and VOC free.

Approved Applications

  • Protection to Woodwork
  • Sealing of decking systems
  • Clear coat waterproofing abilities

Commercial Roof Leak Repair Tape

Manufactured with Micro-Sealant Technology

Spot patching ~ General Repairs ~ Maintenance

ABEP Mule-Hide Tape’s new pressure-activated MicroSealant Technology® is a sealant so advanced it permanently bonds to virtually any roof type including HDPE. Also great for repairing flashings, gutters, skylights, copings, ductwork, and more. Can be used on most external surfaces to strip in side laps, end laps, bridge transitions and penetrations prior to being coated.

ABEP Mule-Hide tape makes a permanent watertight seal and has an elongation of >500%

One-Step – built-in primer for instant bonding.

All Surfaces must be clean and dry.

Chemical Resistant – works in the toughest situations

Environmentally Friendly No Solvents or VOCS 15 year limited warranty

Use On: Butyl Rubber, Modified Bitumen, All Metals, HDPE, EPDM, TPO, Tile, Stone, Brick, Concrete and Wood.

Directions:

  • Clean surface (prime with LinkCoat 1900 if needed).
  • Cut Tape to size. 3) Remove release 4) Place & roll with steel roller. 5) Apply roof coating over the top of the tape.

ABEP Mule-Hide Fabric Tape – a grey synthetic and resin tape with a white woven cloth face.

Is a non-butyl synthetic rubber and resin tape which remains flexible even in cold temperatures. The fabric facer is designed to be coated to match the surrounding roofing surface. NOTE: Fabric tape must be coated.

NOTE: As with all adhesives, sealants and bonding products. Proper clean surface preparation is critical to final application success.

ABEP Mule-Hide Polyvinyl Tape – a grey synthetic and resin tape with a white or black polyvinyl face.

The polyvinyl facer on the exposed side of the tape makes it UV resistant. This product may be used to repair gutters, chimney flashings, metal roofs on mobile homes and transport vehicles.

ABEP Mule-Hide Aluminium Tape – a synthetic and resin tape that is bonded to a 0.10mm aluminium metal backing. ( Total thickness 0.51mm)

Can be used on metal buildings, trailers/RV roofs and sides, drain pipes, duct work, boats, canoes and as a protective coating for surfaces where abrasions and corrosion resistance is required. ABEP Mule-Hide aluminium tape seals to itself so it can be cut and folded around an object.

Blue Barrier Liquid Flashing 2100 is an all-purpose, liquid applied flashing used in construction applications to bridge dissimilar materials and to create weather resistant, fully adhered pan membranes in window and door installations.
Liquid Flashing can be applied over surfaces and substrates that have been prepared per the BEP® Blue Barrier Application Guides.

Approved Applications

  • Window and Door Installation.
  • Vertical Walls.
  • Flashing Details.

Features and Benefits

  • Single-stage product, no mixing needed.
  • One-step application, no primer required.
  • Superior shore hardness prevents membrane wear and tear.
  • Permeable, allows substrates to breathe.
  • High viscosity, supports gun and spread applications.
  • Exceptional adhesion, bonds to multiple substrates.
  • Proprietary modified (STPE) technology, produces durable seamless membrane.
  • Environmentally friendly, solvent-free, isocyanate-free and low VOC.
  • Wet surface application, bonds and cures in wet conditions.
  • Contains fungicide, mould resistant.

Blue Barrier Liquid Flashing 2100 is part of the BEP® air and moisture barrier system.

Note: As with all adhesives, sealants, and bonding products, proper surface preparation is critical to the final application success. Technical and Safety data can be obtained from our website.

Blue Barrier Joint Filler 2200 is a structural adhesive and detail sealant used to fill voids and seams and to bond dissimilar materials. Joint Filler can be applied to surfaces and substrates that have been prepared per the BEP® Blue Barrier Application Guides.

Approved Applications

  • Window and Door Installations.
  • Mechanical Penetrations.
  • Flashing Details.
  • Voids in Multiple Substrates.

Features and Benefits

  • Large joint and seam filler, bridges gaps up to 20 mm (3⁄4”) on multiple substrates.
  • Single-stage product/ No mixing needed.
  • Superior shore hardness/ Prevents membrane wear and tear.
  • Exceptional adhesion/ Bonds to multiple substrates.
  • Non-sag creates a better and cleaner application bead 220% elongation.
  • Environmentally friendly/ Solvent-free, isocyanate-free and low VOC.
  • Proprietary modified (STPE) technology/ Provides superior adhesion.
  • Wet surface application/ Bonds and cures in wet conditions.
  • Class A surface burning rated / Provides added fire protection against the flame spread and smoke development

Blue Barrier Joint Filler 2200 is part of the BEP® air and moisture barrier system.

Note: As with all adhesives, sealants, and bonding products, proper surface preparation is critical to the final application success. Technical and Safety data can be obtained from our website.

Blue Barrier Flash’N Wrap RG2400 is an all-purpose, fully adhered, liquid membrane that can be used for roller applied flashing applications, such as bridging dissimilar materials, and to create liquid applied pan membranes in window & door installations, as well as a roller applied permeable wall substrate coating for building envelope protection applications. Flash’N Wrap RG 2400 can be applied over surfaces and substrates that have been prepared per the BEP® Blue Barrier Application Guides.

Blue Barrier 2300 Spray Grade – is the sprayable version of Blue Barrier 2400RG that is used for waterproofing over solid masonry or a sheet substrate, ply or fibre content, or Magnum Board behind cavity based claddings.

Approved Applications

  • Window and Door Installations
  • Vertical walls
  • Flashing Details
  • Concrete and Plaster Homes

Features and Benefits

  • Single-stage product, no mixing needed
  • One-step application, no primer required
  • Superior shore hardness prevents coating wear and tear
  • Permeable, allows substrates to breath
  • Ideal viscosity supports roller and brush applications
  • Exceptional adhesion, bonds to multiple substrates
  • Proprietary modified (STPE) technology, produces a durable seamless membrane
  • Environmentally friendly, solvent-free, isocyanate-free and low VOC
  • Wet surface application, bonds and cures in wet conditions
  • Contains fungicide, mould resistant

Blue Barrier Flash’N Wrap RG 2400 is part of the BEP® air and moisture barrier system.

Note: As with all adhesives, sealants, and bonding products, proper surface preparation is critical to the final application success. Technical and Safety data can be obtained from our website.

Leaky Home Repair Products and Waterproof Building Wraps NZ

At ABEP, we specialise in leaky home repair products as well as products and solutions that protect all types of building and structure, providing waterproof and weathertight seals.

Our products are manufactured from the highest quality materials using the latest technology, and they are specifically designed for NZ buildings and weather conditions. Get in touch today on +64 6 835 1881 or +64 27 2358 351 to find out more.